Most visited

Recently visited

Added in API level 1

SSLSession

public interface SSLSession

javax.net.ssl.SSLSession
Known Indirect Subclasses


In SSL, sessions are used to describe an ongoing relationship between two entities. Each SSL connection involves one session at a time, but that session may be used on many connections between those entities, simultaneously or sequentially. The session used on a connection may also be replaced by a different session. Sessions are created, or rejoined, as part of the SSL handshaking protocol. Sessions may be invalidated due to policies affecting security or resource usage, or by an application explicitly calling invalidate. Session management policies are typically used to tune performance.

In addition to the standard session attributes, SSL sessions expose these read-only attributes:

Sessions may be explicitly invalidated. Invalidation may also be done implicitly, when faced with certain kinds of errors.

Summary

Public methods

abstract int getApplicationBufferSize()

Gets the current size of the largest application data that is expected when using this session.

abstract String getCipherSuite()

Returns the name of the SSL cipher suite which is used for all connections in the session.

abstract long getCreationTime()

Returns the time at which this Session representation was created, in milliseconds since midnight, January 1, 1970 UTC.

abstract byte[] getId()

Returns the identifier assigned to this Session.

abstract long getLastAccessedTime()

Returns the last time this Session representation was accessed by the session level infrastructure, in milliseconds since midnight, January 1, 1970 UTC.

abstract Certificate[] getLocalCertificates()

Returns the certificate(s) that were sent to the peer during handshaking.

abstract Principal getLocalPrincipal()

Returns the principal that was sent to the peer during handshaking.

abstract int getPacketBufferSize()

Gets the current size of the largest SSL/TLS packet that is expected when using this session.

abstract X509Certificate[] getPeerCertificateChain()

Returns the identity of the peer which was identified as part of defining the session.

abstract Certificate[] getPeerCertificates()

Returns the identity of the peer which was established as part of defining the session.

abstract String getPeerHost()

Returns the host name of the peer in this session.

abstract int getPeerPort()

Returns the port number of the peer in this session.

abstract Principal getPeerPrincipal()

Returns the identity of the peer which was established as part of defining the session.

abstract String getProtocol()

Returns the standard name of the protocol used for all connections in the session.

abstract SSLSessionContext getSessionContext()

Returns the context in which this session is bound.

abstract Object getValue(String name)

Returns the object bound to the given name in the session's application layer data.

abstract String[] getValueNames()

Returns an array of the names of all the application layer data objects bound into the Session.

abstract void invalidate()

Invalidates the session.

abstract boolean isValid()

Returns whether this session is valid and available for resuming or joining.

abstract void putValue(String name, Object value)

Binds the specified value object into the session's application layer data with the given name.

abstract void removeValue(String name)

Removes the object bound to the given name in the session's application layer data.

Public methods

getApplicationBufferSize

Added in API level 1
int getApplicationBufferSize ()

Gets the current size of the largest application data that is expected when using this session.

SSLEngine application data buffers must be large enough to hold the application data from any inbound network application data packet received. Typically, outbound application data buffers can be of any size.

Returns
int the current maximum expected application packet size

See also:

getCipherSuite

Added in API level 1
String getCipherSuite ()

Returns the name of the SSL cipher suite which is used for all connections in the session.

This defines the level of protection provided to the data sent on the connection, including the kind of encryption used and most aspects of how authentication is done.

Returns
String the name of the session's cipher suite

getCreationTime

Added in API level 1
long getCreationTime ()

Returns the time at which this Session representation was created, in milliseconds since midnight, January 1, 1970 UTC.

Returns
long the time this Session was created

getId

Added in API level 1
byte[] getId ()

Returns the identifier assigned to this Session.

Returns
byte[] the Session identifier

getLastAccessedTime

Added in API level 1
long getLastAccessedTime ()

Returns the last time this Session representation was accessed by the session level infrastructure, in milliseconds since midnight, January 1, 1970 UTC.

Access indicates a new connection being established using session data. Application level operations, such as getting or setting a value associated with the session, are not reflected in this access time.

This information is particularly useful in session management policies. For example, a session manager thread could leave all sessions in a given context which haven't been used in a long time; or, the sessions might be sorted according to age to optimize some task.

Returns
long the last time this Session was accessed

getLocalCertificates

Added in API level 1
Certificate[] getLocalCertificates ()

Returns the certificate(s) that were sent to the peer during handshaking.

Note: This method is useful only when using certificate-based cipher suites.

When multiple certificates are available for use in a handshake, the implementation chooses what it considers the "best" certificate chain available, and transmits that to the other side. This method allows the caller to know which certificate chain was actually used.

Returns
Certificate[] an ordered array of certificates, with the local certificate first followed by any certificate authorities. If no certificates were sent, then null is returned.

See also:

getLocalPrincipal

Added in API level 1
Principal getLocalPrincipal ()

Returns the principal that was sent to the peer during handshaking.

Returns
Principal the principal sent to the peer. Returns an X500Principal of the end-entity certificate for X509-based cipher suites, and KerberosPrincipal for Kerberos cipher suites. If no principal was sent, then null is returned.

See also:

getPacketBufferSize

Added in API level 1
int getPacketBufferSize ()

Gets the current size of the largest SSL/TLS packet that is expected when using this session.

A SSLEngine using this session may generate SSL/TLS packets of any size up to and including the value returned by this method. All SSLEngine network buffers should be sized at least this large to avoid insufficient space problems when performing wrap and unwrap calls.

Returns
int the current maximum expected network packet size

See also:

getPeerCertificateChain

Added in API level 1
X509Certificate[] getPeerCertificateChain ()

Returns the identity of the peer which was identified as part of defining the session.

Note: This method can be used only when using certificate-based cipher suites; using it with non-certificate-based cipher suites, such as Kerberos, will throw an SSLPeerUnverifiedException.

Note: this method exists for compatibility with previous releases. New applications should use getPeerCertificates() instead.

Returns
X509Certificate[] an ordered array of peer X.509 certificates, with the peer's own certificate first followed by any certificate authorities. (The certificates are in the original JSSE certificate X509Certificate format.)
Throws
SSLPeerUnverifiedException if the peer's identity has not been verified

See also:

getPeerCertificates

Added in API level 1
Certificate[] getPeerCertificates ()

Returns the identity of the peer which was established as part of defining the session.

Note: This method can be used only when using certificate-based cipher suites; using it with non-certificate-based cipher suites, such as Kerberos, will throw an SSLPeerUnverifiedException.

Returns
Certificate[] an ordered array of peer certificates, with the peer's own certificate first followed by any certificate authorities.
Throws
SSLPeerUnverifiedException if the peer's identity has not been verified

See also:

getPeerHost

Added in API level 1
String getPeerHost ()

Returns the host name of the peer in this session.

For the server, this is the client's host; and for the client, it is the server's host. The name may not be a fully qualified host name or even a host name at all as it may represent a string encoding of the peer's network address. If such a name is desired, it might be resolved through a name service based on the value returned by this method.

This value is not authenticated and should not be relied upon. It is mainly used as a hint for SSLSession caching strategies.

Returns
String the host name of the peer host, or null if no information is available.

getPeerPort

Added in API level 1
int getPeerPort ()

Returns the port number of the peer in this session.

For the server, this is the client's port number; and for the client, it is the server's port number.

This value is not authenticated and should not be relied upon. It is mainly used as a hint for SSLSession caching strategies.

Returns
int the port number of the peer host, or -1 if no information is available.

getPeerPrincipal

Added in API level 1
Principal getPeerPrincipal ()

Returns the identity of the peer which was established as part of defining the session.

Returns
Principal the peer's principal. Returns an X500Principal of the end-entity certiticate for X509-based cipher suites, and KerberosPrincipal for Kerberos cipher suites.
Throws
SSLPeerUnverifiedException if the peer's identity has not been verified

See also:

getProtocol

Added in API level 1
String getProtocol ()

Returns the standard name of the protocol used for all connections in the session.

This defines the protocol used in the connection.

Returns
String the standard name of the protocol used for all connections in the session.

getSessionContext

Added in API level 1
SSLSessionContext getSessionContext ()

Returns the context in which this session is bound.

This context may be unavailable in some environments, in which case this method returns null.

If the context is available and there is a security manager installed, the caller may require permission to access it or a security exception may be thrown. In a Java environment, the security manager's checkPermission method is called with a SSLPermission("getSSLSessionContext") permission.

Returns
SSLSessionContext the session context used for this session, or null if the context is unavailable.
Throws
SecurityException if the calling thread does not have permission to get SSL session context.

getValue

Added in API level 1
Object getValue (String name)

Returns the object bound to the given name in the session's application layer data. Returns null if there is no such binding.

For security reasons, the same named values may not be visible across different access control contexts.

Parameters
name String: the name of the binding to find.
Returns
Object the value bound to that name, or null if the binding does not exist.
Throws
IllegalArgumentException if the argument is null.

getValueNames

Added in API level 1
String[] getValueNames ()

Returns an array of the names of all the application layer data objects bound into the Session.

For security reasons, the same named values may not be visible across different access control contexts.

Returns
String[] a non-null (possibly empty) array of names of the objects bound to this Session.

invalidate

Added in API level 1
void invalidate ()

Invalidates the session.

Future connections will not be able to resume or join this session. However, any existing connection using this session can continue to use the session until the connection is closed.

See also:

isValid

Added in API level 1
boolean isValid ()

Returns whether this session is valid and available for resuming or joining.

Returns
boolean true if this session may be rejoined.

See also:

putValue

Added in API level 1
void putValue (String name, 
                Object value)

Binds the specified value object into the session's application layer data with the given name.

Any existing binding using the same name is replaced. If the new (or existing) value implements the SSLSessionBindingListener interface, the object represented by value is notified appropriately.

For security reasons, the same named values may not be visible across different access control contexts.

Parameters
name String: the name to which the data object will be bound. This may not be null.
value Object: the data object to be bound. This may not be null.
Throws
IllegalArgumentException if either argument is null.

removeValue

Added in API level 1
void removeValue (String name)

Removes the object bound to the given name in the session's application layer data. Does nothing if there is no object bound to the given name. If the bound existing object implements the SessionBindingListener interface, it is notified appropriately.

For security reasons, the same named values may not be visible across different access control contexts.

Parameters
name String: the name of the object to remove visible across different access control contexts
Throws
IllegalArgumentException if the argument is null.

Hooray!