Most visited

Recently visited

Added in API level 1

URLConnection

public abstract class URLConnection
extends Object

java.lang.Object
   ↳ java.net.URLConnection
Known Direct Subclasses
Known Indirect Subclasses


The abstract class URLConnection is the superclass of all classes that represent a communications link between the application and a URL. Instances of this class can be used both to read from and to write to the resource referenced by the URL. In general, creating a connection to a URL is a multistep process:

openConnection() connect()
Manipulate parameters that affect the connection to the remote resource. Interact with the resource; query header fields and contents.
---------------------------->
time
  1. The connection object is created by invoking the openConnection method on a URL.
  2. The setup parameters and general request properties are manipulated.
  3. The actual connection to the remote object is made, using the connect method.
  4. The remote object becomes available. The header fields and the contents of the remote object can be accessed.

The setup parameters are modified using the following methods:

and the general request properties are modified using the method:

Default values for the AllowUserInteraction and UseCaches parameters can be set using the methods setDefaultAllowUserInteraction and setDefaultUseCaches.

Each of the above set methods has a corresponding get method to retrieve the value of the parameter or general request property. The specific parameters and general request properties that are applicable are protocol specific.

The following methods are used to access the header fields and the contents after the connection is made to the remote object:

Certain header fields are accessed frequently. The methods:

provide convenient access to these fields. The getContentType method is used by the getContent method to determine the type of the remote object; subclasses may find it convenient to override the getContentType method.

In the common case, all of the pre-connection parameters and general request properties can be ignored: the pre-connection parameters and request properties default to sensible values. For most clients of this interface, there are only two interesting methods: getInputStream and getContent, which are mirrored in the URL class by convenience methods.

More information on the request properties and header fields of an http connection can be found at:

 http://www.ietf.org/rfc/rfc2616.txt
 
Note about fileNameMap: In versions prior to JDK 1.1.6, field fileNameMap of URLConnection was public. In JDK 1.1.6 and later, fileNameMap is private; accessor and mutator methods getFileNameMap and setFileNameMap are added to access it. This change is also described on the Compatibility page. Invoking the close() methods on the InputStream or OutputStream of an URLConnection after a request may free network resources associated with this instance, unless particular protocol specifications specify different behaviours for it.

See also:

Summary

Fields

protected boolean allowUserInteraction

If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog.

protected boolean connected

If false, this connection object has not created a communications link to the specified URL.

protected boolean doInput

This variable is set by the setDoInput method.

protected boolean doOutput

This variable is set by the setDoOutput method.

protected long ifModifiedSince

Some protocols support skipping the fetching of the object unless the object has been modified more recently than a certain time.

protected URL url

The URL represents the remote object on the World Wide Web to which this connection is opened.

protected boolean useCaches

If true, the protocol is allowed to use caching whenever it can.

Protected constructors

URLConnection(URL url)

Constructs a URL connection to the specified URL.

Public methods

void addRequestProperty(String key, String value)

Adds a general request property specified by a key-value pair.

abstract void connect()

Opens a communications link to the resource referenced by this URL, if such a connection has not already been established.

boolean getAllowUserInteraction()

Returns the value of the allowUserInteraction field for this object.

int getConnectTimeout()

Returns setting for connect timeout.

Object getContent()

Retrieves the contents of this URL connection.

Object getContent(Class[] classes)

Retrieves the contents of this URL connection.

String getContentEncoding()

Returns the value of the content-encoding header field.

int getContentLength()

Returns the value of the content-length header field.

long getContentLengthLong()

Returns the value of the content-length header field as a long.

String getContentType()

Returns the value of the content-type header field.

long getDate()

Returns the value of the date header field.

static boolean getDefaultAllowUserInteraction()

Returns the default value of the allowUserInteraction field.

static String getDefaultRequestProperty(String key)

This method was deprecated in API level 1. The instance specific getRequestProperty method should be used after an appropriate instance of URLConnection is obtained.

boolean getDefaultUseCaches()

Returns the default value of a URLConnection's useCaches flag.

boolean getDoInput()

Returns the value of this URLConnection's doInput flag.

boolean getDoOutput()

Returns the value of this URLConnection's doOutput flag.

long getExpiration()

Returns the value of the expires header field.

static FileNameMap getFileNameMap()

Loads filename map (a mimetable) from a data file.

String getHeaderField(String name)

Returns the value of the named header field.

String getHeaderField(int n)

Returns the value for the nth header field.

long getHeaderFieldDate(String name, long Default)

Returns the value of the named field parsed as date.

int getHeaderFieldInt(String name, int Default)

Returns the value of the named field parsed as a number.

String getHeaderFieldKey(int n)

Returns the key for the nth header field.

long getHeaderFieldLong(String name, long Default)

Returns the value of the named field parsed as a number.

Map<StringList<String>> getHeaderFields()

Returns an unmodifiable Map of the header fields.

long getIfModifiedSince()

Returns the value of this object's ifModifiedSince field.

InputStream getInputStream()

Returns an input stream that reads from this open connection.

long getLastModified()

Returns the value of the last-modified header field.

OutputStream getOutputStream()

Returns an output stream that writes to this connection.

Permission getPermission()

Returns a permission object representing the permission necessary to make the connection represented by this object.

int getReadTimeout()

Returns setting for read timeout.

Map<StringList<String>> getRequestProperties()

Returns an unmodifiable Map of general request properties for this connection.

String getRequestProperty(String key)

Returns the value of the named general request property for this connection.

URL getURL()

Returns the value of this URLConnection's URL field.

boolean getUseCaches()

Returns the value of this URLConnection's useCaches field.

static String guessContentTypeFromName(String fname)

Tries to determine the content type of an object, based on the specified "file" component of a URL.

static String guessContentTypeFromStream(InputStream is)

Tries to determine the type of an input stream based on the characters at the beginning of the input stream.

void setAllowUserInteraction(boolean allowuserinteraction)

Set the value of the allowUserInteraction field of this URLConnection.

void setConnectTimeout(int timeout)

Sets a specified timeout value, in milliseconds, to be used when opening a communications link to the resource referenced by this URLConnection.

static void setContentHandlerFactory(ContentHandlerFactory fac)

Sets the ContentHandlerFactory of an application.

static void setDefaultAllowUserInteraction(boolean defaultallowuserinteraction)

Sets the default value of the allowUserInteraction field for all future URLConnection objects to the specified value.

static void setDefaultRequestProperty(String key, String value)

This method was deprecated in API level 1. The instance specific setRequestProperty method should be used after an appropriate instance of URLConnection is obtained. Invoking this method will have no effect.

void setDefaultUseCaches(boolean defaultusecaches)

Sets the default value of the useCaches field to the specified value.

void setDoInput(boolean doinput)

Sets the value of the doInput field for this URLConnection to the specified value.

void setDoOutput(boolean dooutput)

Sets the value of the doOutput field for this URLConnection to the specified value.

static void setFileNameMap(FileNameMap map)

Sets the FileNameMap.

void setIfModifiedSince(long ifmodifiedsince)

Sets the value of the ifModifiedSince field of this URLConnection to the specified value.

void setReadTimeout(int timeout)

Sets the read timeout to a specified timeout, in milliseconds.

void setRequestProperty(String key, String value)

Sets the general request property.

void setUseCaches(boolean usecaches)

Sets the value of the useCaches field of this URLConnection to the specified value.

String toString()

Returns a String representation of this URL connection.

Inherited methods

From class java.lang.Object

Fields

allowUserInteraction

Added in API level 1
boolean allowUserInteraction

If true, this URL is being examined in a context in which it makes sense to allow user interactions such as popping up an authentication dialog. If false, then no user interaction is allowed.

The value of this field can be set by the setAllowUserInteraction method. Its value is returned by the getAllowUserInteraction method. Its default value is the value of the argument in the last invocation of the setDefaultAllowUserInteraction method.

See also:

connected

Added in API level 1
boolean connected

If false, this connection object has not created a communications link to the specified URL. If true, the communications link has been established.

doInput

Added in API level 1
boolean doInput

This variable is set by the setDoInput method. Its value is returned by the getDoInput method.

A URL connection can be used for input and/or output. Setting the doInput flag to true indicates that the application intends to read data from the URL connection.

The default value of this field is true.

See also:

doOutput

Added in API level 1
boolean doOutput

This variable is set by the setDoOutput method. Its value is returned by the getDoOutput method.

A URL connection can be used for input and/or output. Setting the doOutput flag to true indicates that the application intends to write data to the URL connection.

The default value of this field is false.

See also:

ifModifiedSince

Added in API level 1
long ifModifiedSince

Some protocols support skipping the fetching of the object unless the object has been modified more recently than a certain time.

A nonzero value gives a time as the number of milliseconds since January 1, 1970, GMT. The object is fetched only if it has been modified more recently than that time.

This variable is set by the setIfModifiedSince method. Its value is returned by the getIfModifiedSince method.

The default value of this field is 0, indicating that the fetching must always occur.

See also:

url

Added in API level 1
URL url

The URL represents the remote object on the World Wide Web to which this connection is opened.

The value of this field can be accessed by the getURL method.

The default value of this variable is the value of the URL argument in the URLConnection constructor.

See also:

useCaches

Added in API level 1
boolean useCaches

If true, the protocol is allowed to use caching whenever it can. If false, the protocol must always try to get a fresh copy of the object.

This field is set by the setUseCaches method. Its value is returned by the getUseCaches method.

Its default value is the value given in the last invocation of the setDefaultUseCaches method.

See also:

Protected constructors

URLConnection

Added in API level 1
URLConnection (URL url)

Constructs a URL connection to the specified URL. A connection to the object referenced by the URL is not created.

Parameters
url URL: the specified URL.

Public methods

addRequestProperty

Added in API level 1
void addRequestProperty (String key, 
                String value)

Adds a general request property specified by a key-value pair. This method will not overwrite existing values associated with the same key.

Parameters
key String: the keyword by which the request is known (e.g., "Accept").
value String: the value associated with it.
Throws
IllegalStateException if already connected
NullPointerException if key is null

See also:

connect

Added in API level 1
void connect ()

Opens a communications link to the resource referenced by this URL, if such a connection has not already been established.

If the connect method is called when the connection has already been opened (indicated by the connected field having the value true), the call is ignored.

URLConnection objects go through two phases: first they are created, then they are connected. After being created, and before being connected, various options can be specified (e.g., doInput and UseCaches). After connecting, it is an error to try to set them. Operations that depend on being connected, like getContentLength, will implicitly perform the connection, if necessary.

Throws
SocketTimeoutException if the timeout expires before the connection can be established
IOException if an I/O error occurs while opening the connection.

See also:

getAllowUserInteraction

Added in API level 1
boolean getAllowUserInteraction ()

Returns the value of the allowUserInteraction field for this object.

Returns
boolean the value of the allowUserInteraction field for this object.

See also:

getConnectTimeout

Added in API level 1
int getConnectTimeout ()

Returns setting for connect timeout.

0 return implies that the option is disabled (i.e., timeout of infinity).

Returns
int an int that indicates the connect timeout value in milliseconds

See also:

getContent

Added in API level 1
Object getContent ()

Retrieves the contents of this URL connection.

This method first determines the content type of the object by calling the getContentType method. If this is the first time that the application has seen that specific content type, a content handler for that content type is created:

  1. If the application has set up a content handler factory instance using the setContentHandlerFactory method, the createContentHandler method of that instance is called with the content type as an argument; the result is a content handler for that content type.
  2. If no content handler factory has yet been set up, or if the factory's createContentHandler method returns null, then the application loads the class named:
             sun.net.www.content.<contentType>
         
    where <contentType> is formed by taking the content-type string, replacing all slash characters with a period ('.'), and all other non-alphanumeric characters with the underscore character '_'. The alphanumeric characters are specifically the 26 uppercase ASCII letters 'A' through 'Z', the 26 lowercase ASCII letters 'a' through 'z', and the 10 ASCII digits '0' through '9'. If the specified class does not exist, or is not a subclass of ContentHandler, then an UnknownServiceException is thrown.

Returns
Object the object fetched. The instanceof operator should be used to determine the specific kind of object returned.
Throws
IOException if an I/O error occurs while getting the content.
UnknownServiceException if the protocol does not support the content type.

See also:

getContent

Added in API level 1
Object getContent (Class[] classes)

Retrieves the contents of this URL connection.

Parameters
classes Class: the Class array indicating the requested types
Returns
Object the object fetched that is the first match of the type specified in the classes array. null if none of the requested types are supported. The instanceof operator should be used to determine the specific kind of object returned.
Throws
IOException if an I/O error occurs while getting the content.
UnknownServiceException if the protocol does not support the content type.

See also:

getContentEncoding

Added in API level 1
String getContentEncoding ()

Returns the value of the content-encoding header field.

Returns
String the content encoding of the resource that the URL references, or null if not known.

See also:

getContentLength

Added in API level 1
int getContentLength ()

Returns the value of the content-length header field.

Note: getContentLengthLong() should be preferred over this method, since it returns a long instead and is therefore more portable.

Returns
int the content length of the resource that this connection's URL references, -1 if the content length is not known, or if the content length is greater than Integer.MAX_VALUE.

getContentLengthLong

Added in API level 24
long getContentLengthLong ()

Returns the value of the content-length header field as a long.

Returns
long the content length of the resource that this connection's URL references, or -1 if the content length is not known.

getContentType

Added in API level 1
String getContentType ()

Returns the value of the content-type header field.

Returns
String the content type of the resource that the URL references, or null if not known.

See also:

getDate

Added in API level 1
long getDate ()

Returns the value of the date header field.

Returns
long the sending date of the resource that the URL references, or 0 if not known. The value returned is the number of milliseconds since January 1, 1970 GMT.

See also:

getDefaultAllowUserInteraction

Added in API level 1
boolean getDefaultAllowUserInteraction ()

Returns the default value of the allowUserInteraction field.

Ths default is "sticky", being a part of the static state of all URLConnections. This flag applies to the next, and all following URLConnections that are created.

Returns
boolean the default value of the allowUserInteraction field.

See also:

getDefaultRequestProperty

Added in API level 1
String getDefaultRequestProperty (String key)

This method was deprecated in API level 1.
The instance specific getRequestProperty method should be used after an appropriate instance of URLConnection is obtained.

Returns the value of the default request property. Default request properties are set for every connection.

Parameters
key String: the keyword by which the request is known (e.g., "Accept").
Returns
String the value of the default request property for the specified key.

See also:

getDefaultUseCaches

Added in API level 1
boolean getDefaultUseCaches ()

Returns the default value of a URLConnection's useCaches flag.

Ths default is "sticky", being a part of the static state of all URLConnections. This flag applies to the next, and all following URLConnections that are created.

Returns
boolean the default value of a URLConnection's useCaches flag.

See also:

getDoInput

Added in API level 1
boolean getDoInput ()

Returns the value of this URLConnection's doInput flag.

Returns
boolean the value of this URLConnection's doInput flag.

See also:

getDoOutput

Added in API level 1
boolean getDoOutput ()

Returns the value of this URLConnection's doOutput flag.

Returns
boolean the value of this URLConnection's doOutput flag.

See also:

getExpiration

Added in API level 1
long getExpiration ()

Returns the value of the expires header field.

Returns
long the expiration date of the resource that this URL references, or 0 if not known. The value is the number of milliseconds since January 1, 1970 GMT.

See also:

getFileNameMap

Added in API level 1
FileNameMap getFileNameMap ()

Loads filename map (a mimetable) from a data file. It will first try to load the user-specific table, defined by "content.types.user.table" property. If that fails, it tries to load the default built-in table at lib/content-types.properties under java home.

Returns
FileNameMap the FileNameMap

See also:

getHeaderField

Added in API level 1
String getHeaderField (String name)

Returns the value of the named header field.

If called on a connection that sets the same header multiple times with possibly different values, only the last value is returned.

Parameters
name String: the name of a header field.
Returns
String the value of the named header field, or null if there is no such field in the header.

getHeaderField

Added in API level 1
String getHeaderField (int n)

Returns the value for the nth header field. It returns null if there are fewer than n+1fields.

This method can be used in conjunction with the getHeaderFieldKey method to iterate through all the headers in the message.

Parameters
n int: an index, where n>=0
Returns
String the value of the nth header field or null if there are fewer than n+1 fields

See also:

getHeaderFieldDate

Added in API level 1
long getHeaderFieldDate (String name, 
                long Default)

Returns the value of the named field parsed as date. The result is the number of milliseconds since January 1, 1970 GMT represented by the named field.

This form of getHeaderField exists because some connection types (e.g., http-ng) have pre-parsed headers. Classes for that connection type can override this method and short-circuit the parsing.

Parameters
name String: the name of the header field.
Default long: a default value.
Returns
long the value of the field, parsed as a date. The value of the Default argument is returned if the field is missing or malformed.

getHeaderFieldInt

Added in API level 1
int getHeaderFieldInt (String name, 
                int Default)

Returns the value of the named field parsed as a number.

This form of getHeaderField exists because some connection types (e.g., http-ng) have pre-parsed headers. Classes for that connection type can override this method and short-circuit the parsing.

Parameters
name String: the name of the header field.
Default int: the default value.
Returns
int the value of the named field, parsed as an integer. The Default value is returned if the field is missing or malformed.

getHeaderFieldKey

Added in API level 1
String getHeaderFieldKey (int n)

Returns the key for the nth header field. It returns null if there are fewer than n+1 fields.

Parameters
n int: an index, where n>=0
Returns
String the key for the nth header field, or null if there are fewer than n+1 fields.

getHeaderFieldLong

Added in API level 24
long getHeaderFieldLong (String name, 
                long Default)

Returns the value of the named field parsed as a number.

This form of getHeaderField exists because some connection types (e.g., http-ng) have pre-parsed headers. Classes for that connection type can override this method and short-circuit the parsing.

Parameters
name String: the name of the header field.
Default long: the default value.
Returns
long the value of the named field, parsed as a long. The Default value is returned if the field is missing or malformed.

getHeaderFields

Added in API level 1
Map<StringList<String>> getHeaderFields ()

Returns an unmodifiable Map of the header fields. The Map keys are Strings that represent the response-header field names. Each Map value is an unmodifiable List of Strings that represents the corresponding field values.

Returns
Map<StringList<String>> a Map of header fields

getIfModifiedSince

Added in API level 1
long getIfModifiedSince ()

Returns the value of this object's ifModifiedSince field.

Returns
long the value of this object's ifModifiedSince field.

See also:

getInputStream

Added in API level 1
InputStream getInputStream ()

Returns an input stream that reads from this open connection. A SocketTimeoutException can be thrown when reading from the returned input stream if the read timeout expires before data is available for read.

Returns
InputStream an input stream that reads from this open connection.
Throws
IOException if an I/O error occurs while creating the input stream.
UnknownServiceException if the protocol does not support input.

See also:

getLastModified

Added in API level 1
long getLastModified ()

Returns the value of the last-modified header field. The result is the number of milliseconds since January 1, 1970 GMT.

Returns
long the date the resource referenced by this URLConnection was last modified, or 0 if not known.

See also:

getOutputStream

Added in API level 1
OutputStream getOutputStream ()

Returns an output stream that writes to this connection.

Returns
OutputStream an output stream that writes to this connection.
Throws
IOException if an I/O error occurs while creating the output stream.
UnknownServiceException if the protocol does not support output.

getPermission

Added in API level 1
Permission getPermission ()

Returns a permission object representing the permission necessary to make the connection represented by this object. This method returns null if no permission is required to make the connection. By default, this method returns java.security.AllPermission. Subclasses should override this method and return the permission that best represents the permission required to make a a connection to the URL. For example, a URLConnection representing a file: URL would return a java.io.FilePermission object.

The permission returned may dependent upon the state of the connection. For example, the permission before connecting may be different from that after connecting. For example, an HTTP sever, say foo.com, may redirect the connection to a different host, say bar.com. Before connecting the permission returned by the connection will represent the permission needed to connect to foo.com, while the permission returned after connecting will be to bar.com.

Permissions are generally used for two purposes: to protect caches of objects obtained through URLConnections, and to check the right of a recipient to learn about a particular URL. In the first case, the permission should be obtained after the object has been obtained. For example, in an HTTP connection, this will represent the permission to connect to the host from which the data was ultimately fetched. In the second case, the permission should be obtained and tested before connecting.

Returns
Permission the permission object representing the permission necessary to make the connection represented by this URLConnection.
Throws
IOException if the computation of the permission requires network or file I/O and an exception occurs while computing it.

getReadTimeout

Added in API level 1
int getReadTimeout ()

Returns setting for read timeout. 0 return implies that the option is disabled (i.e., timeout of infinity).

Returns
int an int that indicates the read timeout value in milliseconds

See also:

getRequestProperties

Added in API level 1
Map<StringList<String>> getRequestProperties ()

Returns an unmodifiable Map of general request properties for this connection. The Map keys are Strings that represent the request-header field names. Each Map value is a unmodifiable List of Strings that represents the corresponding field values.

Returns
Map<StringList<String>> a Map of the general request properties for this connection.
Throws
IllegalStateException if already connected

getRequestProperty

Added in API level 1
String getRequestProperty (String key)

Returns the value of the named general request property for this connection.

Parameters
key String: the keyword by which the request is known (e.g., "Accept").
Returns
String the value of the named general request property for this connection. If key is null, then null is returned.
Throws
IllegalStateException if already connected

See also:

getURL

Added in API level 1
URL getURL ()

Returns the value of this URLConnection's URL field.

Returns
URL the value of this URLConnection's URL field.

See also:

getUseCaches

Added in API level 1
boolean getUseCaches ()

Returns the value of this URLConnection's useCaches field.

Returns
boolean the value of this URLConnection's useCaches field.

See also:

guessContentTypeFromName

Added in API level 1
String guessContentTypeFromName (String fname)

Tries to determine the content type of an object, based on the specified "file" component of a URL. This is a convenience method that can be used by subclasses that override the getContentType method.

Parameters
fname String: a filename.
Returns
String a guess as to what the content type of the object is, based upon its file name.

See also:

guessContentTypeFromStream

Added in API level 1
String guessContentTypeFromStream (InputStream is)

Tries to determine the type of an input stream based on the characters at the beginning of the input stream. This method can be used by subclasses that override the getContentType method.

Ideally, this routine would not be needed. But many http servers return the incorrect content type; in addition, there are many nonstandard extensions. Direct inspection of the bytes to determine the content type is often more accurate than believing the content type claimed by the http server.

Parameters
is InputStream: an input stream that supports marks.
Returns
String a guess at the content type, or null if none can be determined.
Throws
IOException if an I/O error occurs while reading the input stream.

See also:

setAllowUserInteraction

Added in API level 1
void setAllowUserInteraction (boolean allowuserinteraction)

Set the value of the allowUserInteraction field of this URLConnection.

Parameters
allowuserinteraction boolean: the new value.
Throws
IllegalStateException if already connected

See also:

setConnectTimeout

Added in API level 1
void setConnectTimeout (int timeout)

Sets a specified timeout value, in milliseconds, to be used when opening a communications link to the resource referenced by this URLConnection. If the timeout expires before the connection can be established, a java.net.SocketTimeoutException is raised. A timeout of zero is interpreted as an infinite timeout.

Some non-standard implmentation of this method may ignore the specified timeout. To see the connect timeout set, please call getConnectTimeout().

Parameters
timeout int: an int that specifies the connect timeout value in milliseconds
Throws
IllegalArgumentException if the timeout parameter is negative

See also:

setContentHandlerFactory

Added in API level 1
void setContentHandlerFactory (ContentHandlerFactory fac)

Sets the ContentHandlerFactory of an application. It can be called at most once by an application.

The ContentHandlerFactory instance is used to construct a content handler from a content type

If there is a security manager, this method first calls the security manager's checkSetFactory method to ensure the operation is allowed. This could result in a SecurityException.

Parameters
fac ContentHandlerFactory: the desired factory.
Throws
Error if the factory has already been defined.
SecurityException if a security manager exists and its checkSetFactory method doesn't allow the operation.

See also:

setDefaultAllowUserInteraction

Added in API level 1
void setDefaultAllowUserInteraction (boolean defaultallowuserinteraction)

Sets the default value of the allowUserInteraction field for all future URLConnection objects to the specified value.

Parameters
defaultallowuserinteraction boolean: the new value.

See also:

setDefaultRequestProperty

Added in API level 1
void setDefaultRequestProperty (String key, 
                String value)

This method was deprecated in API level 1.
The instance specific setRequestProperty method should be used after an appropriate instance of URLConnection is obtained. Invoking this method will have no effect.

Sets the default value of a general request property. When a URLConnection is created, it is initialized with these properties.

Parameters
key String: the keyword by which the request is known (e.g., "Accept").
value String: the value associated with the key.

See also:

setDefaultUseCaches

Added in API level 1
void setDefaultUseCaches (boolean defaultusecaches)

Sets the default value of the useCaches field to the specified value.

Parameters
defaultusecaches boolean: the new value.

See also:

setDoInput

Added in API level 1
void setDoInput (boolean doinput)

Sets the value of the doInput field for this URLConnection to the specified value.

A URL connection can be used for input and/or output. Set the DoInput flag to true if you intend to use the URL connection for input, false if not. The default is true.

Parameters
doinput boolean: the new value.
Throws
IllegalStateException if already connected

See also:

setDoOutput

Added in API level 1
void setDoOutput (boolean dooutput)

Sets the value of the doOutput field for this URLConnection to the specified value.

A URL connection can be used for input and/or output. Set the DoOutput flag to true if you intend to use the URL connection for output, false if not. The default is false.

Parameters
dooutput boolean: the new value.
Throws
IllegalStateException if already connected

See also:

setFileNameMap

Added in API level 1
void setFileNameMap (FileNameMap map)

Sets the FileNameMap.

If there is a security manager, this method first calls the security manager's checkSetFactory method to ensure the operation is allowed. This could result in a SecurityException.

Parameters
map FileNameMap: the FileNameMap to be set
Throws
SecurityException if a security manager exists and its checkSetFactory method doesn't allow the operation.

See also:

setIfModifiedSince

Added in API level 1
void setIfModifiedSince (long ifmodifiedsince)

Sets the value of the ifModifiedSince field of this URLConnection to the specified value.

Parameters
ifmodifiedsince long: the new value.
Throws
IllegalStateException if already connected

See also:

setReadTimeout

Added in API level 1
void setReadTimeout (int timeout)

Sets the read timeout to a specified timeout, in milliseconds. A non-zero value specifies the timeout when reading from Input stream when a connection is established to a resource. If the timeout expires before there is data available for read, a java.net.SocketTimeoutException is raised. A timeout of zero is interpreted as an infinite timeout.

Some non-standard implementation of this method ignores the specified timeout. To see the read timeout set, please call getReadTimeout().

Parameters
timeout int: an int that specifies the timeout value to be used in milliseconds
Throws
IllegalArgumentException if the timeout parameter is negative

See also:

setRequestProperty

Added in API level 1
void setRequestProperty (String key, 
                String value)

Sets the general request property. If a property with the key already exists, overwrite its value with the new value.

NOTE: HTTP requires all request properties which can legally have multiple instances with the same key to use a comma-seperated list syntax which enables multiple properties to be appended into a single property.

Parameters
key String: the keyword by which the request is known (e.g., "Accept").
value String: the value associated with it.
Throws
IllegalStateException if already connected
NullPointerException if key is null

See also:

setUseCaches

Added in API level 1
void setUseCaches (boolean usecaches)

Sets the value of the useCaches field of this URLConnection to the specified value.

Some protocols do caching of documents. Occasionally, it is important to be able to "tunnel through" and ignore the caches (e.g., the "reload" button in a browser). If the UseCaches flag on a connection is true, the connection is allowed to use whatever caches it can. If false, caches are to be ignored. The default value comes from DefaultUseCaches, which defaults to true.

Parameters
usecaches boolean: a boolean indicating whether or not to allow caching
Throws
IllegalStateException if already connected

See also:

toString

Added in API level 1
String toString ()

Returns a String representation of this URL connection.

Returns
String a string representation of this URLConnection.

Hooray!