Most visited

Recently visited

Results for

Added in API level 1

Summary: Inherited Fields | Ctors | Methods | Inherited Methods | [Expand All]

DataInputStream

public class DataInputStream
extends FilterInputStream implements DataInput

java.lang.Object
↳	java.io.InputStream
	↳	java.io.FilterInputStream
		↳	java.io.DataInputStream

A data input stream lets an application read primitive Java data types from an underlying input stream in a machine-independent way. An application uses a data output stream to write data that can later be read by a data input stream.

DataInputStream is not necessarily safe for multithreaded access. Thread safety is optional and is the responsibility of users of methods in this class.

See also:

DataOutputStream

Summary

Inherited fields

From class


    java.io.FilterInputStream

Public constructors
`DataInputStream(InputStream in)` Creates a DataInputStream that uses the specified underlying InputStream.

Public methods
`final int`	`read(byte[] b)` Reads some number of bytes from the contained input stream and stores them into the buffer array `b`.
`final int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from the contained input stream into an array of bytes.
`final boolean`	`readBoolean()` See the general contract of the `readBoolean` method of `DataInput`.
`final byte`	`readByte()` See the general contract of the `readByte` method of `DataInput`.
`final char`	`readChar()` See the general contract of the `readChar` method of `DataInput`.
`final double`	`readDouble()` See the general contract of the `readDouble` method of `DataInput`.
`final float`	`readFloat()` See the general contract of the `readFloat` method of `DataInput`.
`final void`	`readFully(byte[] b)` See the general contract of the `readFully` method of `DataInput`.
`final void`	`readFully(byte[] b, int off, int len)` See the general contract of the `readFully` method of `DataInput`.
`final int`	`readInt()` See the general contract of the `readInt` method of `DataInput`.
`final String`	`readLine()` This method was deprecated in API level 1. This method does not properly convert bytes to characters. As of JDK 1.1, the preferred way to read lines of text is via the `BufferedReader.readLine()` method. Programs that use the `DataInputStream` class to read lines can be converted to use the `BufferedReader` class by replacing code of the form: DataInputStream d = new DataInputStream(in); with: BufferedReader d = new BufferedReader(new InputStreamReader(in));
`final long`	`readLong()` See the general contract of the `readLong` method of `DataInput`.
`final short`	`readShort()` See the general contract of the `readShort` method of `DataInput`.
`final String`	`readUTF()` See the general contract of the `readUTF` method of `DataInput`.
`static final String`	`readUTF(DataInput in)` Reads from the stream `in` a representation of a Unicode character string encoded in modified UTF-8 format; this string of characters is then returned as a `String`.
`final int`	`readUnsignedByte()` See the general contract of the `readUnsignedByte` method of `DataInput`.
`final int`	`readUnsignedShort()` See the general contract of the `readUnsignedShort` method of `DataInput`.
`final int`	`skipBytes(int n)` See the general contract of the `skipBytes` method of `DataInput`.

Inherited methods

From class


  
    java.io.FilterInputStream

`int`	`available()` Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next caller of a method for this input stream.
`void`	`close()` Closes this input stream and releases any system resources associated with the stream.
`void`	`mark(int readlimit)` Marks the current position in this input stream.
`boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods.
`int`	`read()` Reads the next byte of data from this input stream.
`int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from this input stream into an array of bytes.
`int`	`read(byte[] b)` Reads up to `byte.length` bytes of data from this input stream into an array of bytes.
`void`	`reset()` Repositions this stream to the position at the time the `mark` method was last called on this input stream.
`long`	`skip(long n)` Skips over and discards `n` bytes of data from the input stream.

From class


  
    java.io.InputStream

`int`	`available()` Returns an estimate of the number of bytes that can be read (or skipped over) from this input stream without blocking by the next invocation of a method for this input stream.
`void`	`close()` Closes this input stream and releases any system resources associated with the stream.
`void`	`mark(int readlimit)` Marks the current position in this input stream.
`boolean`	`markSupported()` Tests if this input stream supports the `mark` and `reset` methods.
`abstract int`	`read()` Reads the next byte of data from the input stream.
`int`	`read(byte[] b, int off, int len)` Reads up to `len` bytes of data from the input stream into an array of bytes.
`int`	`read(byte[] b)` Reads some number of bytes from the input stream and stores them into the buffer array `b`.
`void`	`reset()` Repositions this stream to the position at the time the `mark` method was last called on this input stream.
`long`	`skip(long n)` Skips over and discards `n` bytes of data from this input stream.

From class


  
    java.lang.Object

`Object`	`clone()` Creates and returns a copy of this object.
`boolean`	`equals(Object obj)` Indicates whether some other object is "equal to" this one.
`void`	`finalize()` Called by the garbage collector on an object when garbage collection determines that there are no more references to the object.
`final Class<?>`	`getClass()` Returns the runtime class of this `Object`.
`int`	`hashCode()` Returns a hash code value for the object.
`final void`	`notify()` Wakes up a single thread that is waiting on this object's monitor.
`final void`	`notifyAll()` Wakes up all threads that are waiting on this object's monitor.
`String`	`toString()` Returns a string representation of the object.
`final void`	`wait(long millis, int nanos)` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object, or some other thread interrupts the current thread, or a certain amount of real time has elapsed.
`final void`	`wait(long millis)` Causes the current thread to wait until either another thread invokes the `notify()` method or the `notifyAll()` method for this object, or a specified amount of time has elapsed.
`final void`	`wait()` Causes the current thread to wait until another thread invokes the `notify()` method or the `notifyAll()` method for this object.

From interface


  
    java.io.Closeable

From interface


  
    java.io.DataInput

`abstract boolean`	`readBoolean()` Reads one input byte and returns `true` if that byte is nonzero, `false` if that byte is zero.
`abstract byte`	`readByte()` Reads and returns one input byte.
`abstract char`	`readChar()` Reads two input bytes and returns a `char` value.
`abstract double`	`readDouble()` Reads eight input bytes and returns a `double` value.
`abstract float`	`readFloat()` Reads four input bytes and returns a `float` value.
`abstract void`	`readFully(byte[] b)` Reads some bytes from an input stream and stores them into the buffer array `b`.
`abstract void`	`readFully(byte[] b, int off, int len)` Reads `len` bytes from an input stream.
`abstract int`	`readInt()` Reads four input bytes and returns an `int` value.
`abstract String`	`readLine()` Reads the next line of text from the input stream.
`abstract long`	`readLong()` Reads eight input bytes and returns a `long` value.
`abstract short`	`readShort()` Reads two input bytes and returns a `short` value.
`abstract String`	`readUTF()` Reads in a string that has been encoded using a modified UTF-8 format.
`abstract int`	`readUnsignedByte()` Reads one input byte, zero-extends it to type `int`, and returns the result, which is therefore in the range `0` through `255`.
`abstract int`	`readUnsignedShort()` Reads two input bytes and returns an `int` value in the range `0` through `65535`.
`abstract int`	`skipBytes(int n)` Makes an attempt to skip over `n` bytes of data from the input stream, discarding the skipped bytes.

From interface


  
    java.lang.AutoCloseable

Public constructors

DataInputStream

Added in API level 1

DataInputStream (InputStream in)

Creates a DataInputStream that uses the specified underlying InputStream.

Parameters
`in`	`InputStream`: the specified input stream

Public methods

read

Added in API level 1

int read (byte[] b)

Reads some number of bytes from the contained input stream and stores them into the buffer array b. The number of bytes actually read is returned as an integer. This method blocks until input data is available, end of file is detected, or an exception is thrown.

If b is null, a NullPointerException is thrown. If the length of b is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[0], the next one into b[1], and so on. The number of bytes read is, at most, equal to the length of b. Let k be the number of bytes actually read; these bytes will be stored in elements b[0] through b[k-1], leaving elements b[k] through b[b.length-1] unaffected.

The read(b) method has the same effect as:

 read(b, 0, b.length)

Parameters
`b`	`byte`: the buffer into which the data is read.

Returns
`int`	the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

Throws
`IOException`	if the first byte cannot be read for any reason other than end of file, the stream has been closed and the underlying input stream does not support reading after close, or another I/O error occurs.

See also:

in
read(byte[], int, int)

read

Added in API level 1

int read (byte[] b, 
                int off, 
                int len)

Reads up to len bytes of data from the contained input stream into an array of bytes. An attempt is made to read as many as len bytes, but a smaller number may be read, possibly zero. The number of bytes actually read is returned as an integer.

This method blocks until input data is available, end of file is detected, or an exception is thrown.

If len is zero, then no bytes are read and 0 is returned; otherwise, there is an attempt to read at least one byte. If no byte is available because the stream is at end of file, the value -1 is returned; otherwise, at least one byte is read and stored into b.

The first byte read is stored into element b[off], the next one into b[off+1], and so on. The number of bytes read is, at most, equal to len. Let k be the number of bytes actually read; these bytes will be stored in elements b[off] through b[off+k-1], leaving elements b[off+k] through b[off+len-1] unaffected.

In every case, elements b[0] through b[off] and elements b[off+len] through b[b.length-1] are unaffected.

Parameters
`b`	`byte`: the buffer into which the data is read.
`off`	`int`: the start offset in the destination array `b`
`len`	`int`: the maximum number of bytes read.

Returns
`int`	the total number of bytes read into the buffer, or `-1` if there is no more data because the end of the stream has been reached.

Throws
`NullPointerException`	If `b` is `null`.
`IndexOutOfBoundsException`	If `off` is negative, `len` is negative, or `len` is greater than `b.length - off`
`IOException`	if the first byte cannot be read for any reason other than end of file, the stream has been closed and the underlying input stream does not support reading after close, or another I/O error occurs.

See also:

in
read(byte[], int, int)

readBoolean

Added in API level 1

boolean readBoolean ()

See the general contract of the readBoolean method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`boolean`	the `boolean` value read.

Throws
`EOFException`	if this input stream has reached the end.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readByte

Added in API level 1

byte readByte ()

See the general contract of the readByte method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`byte`	the next byte of this input stream as a signed 8-bit `byte`.

Throws
`EOFException`	if this input stream has reached the end.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readChar

Added in API level 1

char readChar ()

See the general contract of the readChar method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`char`	the next two bytes of this input stream, interpreted as a `char`.

Throws
`EOFException`	if this input stream reaches the end before reading two bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readDouble

Added in API level 1

double readDouble ()

See the general contract of the readDouble method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`double`	the next eight bytes of this input stream, interpreted as a `double`.

Throws
`EOFException`	if this input stream reaches the end before reading eight bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

readFloat

Added in API level 1

float readFloat ()

See the general contract of the readFloat method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`float`	the next four bytes of this input stream, interpreted as a `float`.

Throws
`EOFException`	if this input stream reaches the end before reading four bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

readInt()
intBitsToFloat(int)

readFully

Added in API level 1

void readFully (byte[] b)

See the general contract of the readFully method of DataInput.

Bytes for this operation are read from the contained input stream.

Parameters
`b`	`byte`: the buffer into which the data is read.

Throws
`EOFException`	if this input stream reaches the end before reading all the bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readFully

Added in API level 1

void readFully (byte[] b, 
                int off, 
                int len)

See the general contract of the readFully method of DataInput.

Bytes for this operation are read from the contained input stream.

Parameters
`b`	`byte`: the buffer into which the data is read.
`off`	`int`: the start offset of the data.
`len`	`int`: the number of bytes to read.

Throws
`EOFException`	if this input stream reaches the end before reading all the bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readInt

Added in API level 1

int readInt ()

See the general contract of the readInt method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`int`	the next four bytes of this input stream, interpreted as an `int`.

Throws
`EOFException`	if this input stream reaches the end before reading four bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readLine

Added in API level 1

String readLine ()

This method was deprecated in API level 1.
This method does not properly convert bytes to characters. As of JDK 1.1, the preferred way to read lines of text is via the BufferedReader.readLine() method. Programs that use the DataInputStream class to read lines can be converted to use the BufferedReader class by replacing code of the form:

     DataInputStream d = new DataInputStream(in);

with:

     BufferedReader d
          = new BufferedReader(new InputStreamReader(in));

See the general contract of the readLine method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`String`	the next line of text from this input stream.

Throws
`IOException`	if an I/O error occurs.

See also:

readLine()
in

readLong

Added in API level 1

long readLong ()

See the general contract of the readLong method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`long`	the next eight bytes of this input stream, interpreted as a `long`.

Throws
`EOFException`	if this input stream reaches the end before reading eight bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readShort

Added in API level 1

short readShort ()

See the general contract of the readShort method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`short`	the next two bytes of this input stream, interpreted as a signed 16-bit number.

Throws
`EOFException`	if this input stream reaches the end before reading two bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readUTF

Added in API level 1

String readUTF ()

See the general contract of the readUTF method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`String`	a Unicode string.

Throws
`EOFException`	if this input stream reaches the end before reading all the bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
`UTFDataFormatException`	if the bytes do not represent a valid modified UTF-8 encoding of a string.

See also:

readUTF(java.io.DataInput)

readUTF

Added in API level 1

String readUTF (DataInput in)

Reads from the stream in a representation of a Unicode character string encoded in modified UTF-8 format; this string of characters is then returned as a String. The details of the modified UTF-8 representation are exactly the same as for the readUTF method of DataInput.

Parameters
`in`	`DataInput`: a data input stream.

Returns
`String`	a Unicode string.

Throws
`EOFException`	if the input stream reaches the end before all the bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.
`UTFDataFormatException`	if the bytes do not represent a valid modified UTF-8 encoding of a Unicode string.

See also:

readUnsignedShort()

readUnsignedByte

Added in API level 1

int readUnsignedByte ()

See the general contract of the readUnsignedByte method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`int`	the next byte of this input stream, interpreted as an unsigned 8-bit number.

Throws
`EOFException`	if this input stream has reached the end.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

readUnsignedShort

Added in API level 1

int readUnsignedShort ()

See the general contract of the readUnsignedShort method of DataInput.

Bytes for this operation are read from the contained input stream.

Returns
`int`	the next two bytes of this input stream, interpreted as an unsigned 16-bit integer.

Throws
`EOFException`	if this input stream reaches the end before reading two bytes.
`IOException`	the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

See also:

in

skipBytes

Added in API level 1

int skipBytes (int n)

See the general contract of the skipBytes method of DataInput.

Bytes for this operation are read from the contained input stream.

Parameters
`n`	`int`: the number of bytes to be skipped.

Returns
`int`	the actual number of bytes skipped.

Throws
`IOException`	if the contained input stream does not support seek, or the stream has been closed and the contained input stream does not support reading after close, or another I/O error occurs.

Interfaces

Classes

Exceptions

Errors

Most visited

Recently visited

Results for

DataInputStream

Summary

Inherited fields

Public constructors

Public methods

Inherited methods

Public constructors

DataInputStream

Public methods

read

read

readBoolean

readByte

readChar

readDouble

readFloat

readFully

readFully

readInt

readLine

readLong

readShort

readUTF

readUTF

readUnsignedByte

readUnsignedShort

skipBytes