Most visited

Recently visited

Added in API level 1

Gravity

public class Gravity
extends Object

java.lang.Object
   ↳ android.view.Gravity


Standard constants and tools for placing an object within a potentially larger container.

Summary

Constants

int AXIS_CLIP

Raw bit controlling whether the right/bottom edge is clipped to its container, based on the gravity direction being applied.

int AXIS_PULL_AFTER

Raw bit controlling how the right/bottom edge is placed.

int AXIS_PULL_BEFORE

Raw bit controlling how the left/top edge is placed.

int AXIS_SPECIFIED

Raw bit indicating the gravity for an axis has been specified.

int AXIS_X_SHIFT

Bits defining the horizontal axis.

int AXIS_Y_SHIFT

Bits defining the vertical axis.

int BOTTOM

Push object to the bottom of its container, not changing its size.

int CENTER

Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.

int CENTER_HORIZONTAL

Place object in the horizontal center of its container, not changing its size.

int CENTER_VERTICAL

Place object in the vertical center of its container, not changing its size.

int CLIP_HORIZONTAL

Flag to clip the edges of the object to its container along the horizontal axis.

int CLIP_VERTICAL

Flag to clip the edges of the object to its container along the vertical axis.

int DISPLAY_CLIP_HORIZONTAL

Special constant to enable clipping to an overall display along the horizontal dimension.

int DISPLAY_CLIP_VERTICAL

Special constant to enable clipping to an overall display along the vertical dimension.

int END

Push object to x-axis position at the end of its container, not changing its size.

int FILL

Grow the horizontal and vertical size of the object if needed so it completely fills its container.

int FILL_HORIZONTAL

Grow the horizontal size of the object if needed so it completely fills its container.

int FILL_VERTICAL

Grow the vertical size of the object if needed so it completely fills its container.

int HORIZONTAL_GRAVITY_MASK

Binary mask to get the absolute horizontal gravity of a gravity.

int LEFT

Push object to the left of its container, not changing its size.

int NO_GRAVITY

Constant indicating that no gravity has been set

int RELATIVE_HORIZONTAL_GRAVITY_MASK

Binary mask for the horizontal gravity and script specific direction bit.

int RELATIVE_LAYOUT_DIRECTION

Raw bit controlling whether the layout direction is relative or not (START/END instead of absolute LEFT/RIGHT).

int RIGHT

Push object to the right of its container, not changing its size.

int START

Push object to x-axis position at the start of its container, not changing its size.

int TOP

Push object to the top of its container, not changing its size.

int VERTICAL_GRAVITY_MASK

Binary mask to get the vertical gravity of a gravity.

Public constructors

Gravity()

Public methods

static void apply(int gravity, int w, int h, Rect container, int xAdj, int yAdj, Rect outRect)

Apply a gravity constant to an object.

static void apply(int gravity, int w, int h, Rect container, Rect outRect, int layoutDirection)

Apply a gravity constant to an object and take care if layout direction is RTL or not.

static void apply(int gravity, int w, int h, Rect container, int xAdj, int yAdj, Rect outRect, int layoutDirection)

Apply a gravity constant to an object.

static void apply(int gravity, int w, int h, Rect container, Rect outRect)

Apply a gravity constant to an object.

static void applyDisplay(int gravity, Rect display, Rect inoutObj)

Apply additional gravity behavior based on the overall "display" that an object exists in.

static void applyDisplay(int gravity, Rect display, Rect inoutObj, int layoutDirection)

Apply additional gravity behavior based on the overall "display" that an object exists in.

static int getAbsoluteGravity(int gravity, int layoutDirection)

Convert script specific gravity to absolute horizontal value.

static boolean isHorizontal(int gravity)

Indicate whether the supplied gravity has an horizontal pull.

static boolean isVertical(int gravity)

Indicate whether the supplied gravity has a vertical pull.

Inherited methods

From class java.lang.Object

Constants

AXIS_CLIP

Added in API level 3
int AXIS_CLIP

Raw bit controlling whether the right/bottom edge is clipped to its container, based on the gravity direction being applied.

Constant Value: 8 (0x00000008)

AXIS_PULL_AFTER

Added in API level 1
int AXIS_PULL_AFTER

Raw bit controlling how the right/bottom edge is placed.

Constant Value: 4 (0x00000004)

AXIS_PULL_BEFORE

Added in API level 1
int AXIS_PULL_BEFORE

Raw bit controlling how the left/top edge is placed.

Constant Value: 2 (0x00000002)

AXIS_SPECIFIED

Added in API level 1
int AXIS_SPECIFIED

Raw bit indicating the gravity for an axis has been specified.

Constant Value: 1 (0x00000001)

AXIS_X_SHIFT

Added in API level 1
int AXIS_X_SHIFT

Bits defining the horizontal axis.

Constant Value: 0 (0x00000000)

AXIS_Y_SHIFT

Added in API level 1
int AXIS_Y_SHIFT

Bits defining the vertical axis.

Constant Value: 4 (0x00000004)

BOTTOM

Added in API level 1
int BOTTOM

Push object to the bottom of its container, not changing its size.

Constant Value: 80 (0x00000050)

CENTER

Added in API level 1
int CENTER

Place the object in the center of its container in both the vertical and horizontal axis, not changing its size.

Constant Value: 17 (0x00000011)

CENTER_HORIZONTAL

Added in API level 1
int CENTER_HORIZONTAL

Place object in the horizontal center of its container, not changing its size.

Constant Value: 1 (0x00000001)

CENTER_VERTICAL

Added in API level 1
int CENTER_VERTICAL

Place object in the vertical center of its container, not changing its size.

Constant Value: 16 (0x00000010)

CLIP_HORIZONTAL

Added in API level 3
int CLIP_HORIZONTAL

Flag to clip the edges of the object to its container along the horizontal axis.

Constant Value: 8 (0x00000008)

CLIP_VERTICAL

Added in API level 3
int CLIP_VERTICAL

Flag to clip the edges of the object to its container along the vertical axis.

Constant Value: 128 (0x00000080)

DISPLAY_CLIP_HORIZONTAL

Added in API level 3
int DISPLAY_CLIP_HORIZONTAL

Special constant to enable clipping to an overall display along the horizontal dimension. This is not applied by default by apply(int, int, int, Rect, int, int, Rect); you must do so yourself by calling applyDisplay(int, Rect, Rect).

Constant Value: 16777216 (0x01000000)

DISPLAY_CLIP_VERTICAL

Added in API level 3
int DISPLAY_CLIP_VERTICAL

Special constant to enable clipping to an overall display along the vertical dimension. This is not applied by default by apply(int, int, int, Rect, int, int, Rect); you must do so yourself by calling applyDisplay(int, Rect, Rect).

Constant Value: 268435456 (0x10000000)

END

Added in API level 14
int END

Push object to x-axis position at the end of its container, not changing its size.

Constant Value: 8388613 (0x00800005)

FILL

Added in API level 1
int FILL

Grow the horizontal and vertical size of the object if needed so it completely fills its container.

Constant Value: 119 (0x00000077)

FILL_HORIZONTAL

Added in API level 1
int FILL_HORIZONTAL

Grow the horizontal size of the object if needed so it completely fills its container.

Constant Value: 7 (0x00000007)

FILL_VERTICAL

Added in API level 1
int FILL_VERTICAL

Grow the vertical size of the object if needed so it completely fills its container.

Constant Value: 112 (0x00000070)

HORIZONTAL_GRAVITY_MASK

Added in API level 1
int HORIZONTAL_GRAVITY_MASK

Binary mask to get the absolute horizontal gravity of a gravity.

Constant Value: 7 (0x00000007)

LEFT

Added in API level 1
int LEFT

Push object to the left of its container, not changing its size.

Constant Value: 3 (0x00000003)

NO_GRAVITY

Added in API level 1
int NO_GRAVITY

Constant indicating that no gravity has been set

Constant Value: 0 (0x00000000)

RELATIVE_HORIZONTAL_GRAVITY_MASK

Added in API level 14
int RELATIVE_HORIZONTAL_GRAVITY_MASK

Binary mask for the horizontal gravity and script specific direction bit.

Constant Value: 8388615 (0x00800007)

RELATIVE_LAYOUT_DIRECTION

Added in API level 14
int RELATIVE_LAYOUT_DIRECTION

Raw bit controlling whether the layout direction is relative or not (START/END instead of absolute LEFT/RIGHT).

Constant Value: 8388608 (0x00800000)

RIGHT

Added in API level 1
int RIGHT

Push object to the right of its container, not changing its size.

Constant Value: 5 (0x00000005)

START

Added in API level 14
int START

Push object to x-axis position at the start of its container, not changing its size.

Constant Value: 8388611 (0x00800003)

TOP

Added in API level 1
int TOP

Push object to the top of its container, not changing its size.

Constant Value: 48 (0x00000030)

VERTICAL_GRAVITY_MASK

Added in API level 1
int VERTICAL_GRAVITY_MASK

Binary mask to get the vertical gravity of a gravity.

Constant Value: 112 (0x00000070)

Public constructors

Gravity

Added in API level 1
Gravity ()

Public methods

apply

Added in API level 1
void apply (int gravity, 
                int w, 
                int h, 
                Rect container, 
                int xAdj, 
                int yAdj, 
                Rect outRect)

Apply a gravity constant to an object.

Parameters
gravity int: The desired placement of the object, as defined by the constants in this class.
w int: The horizontal size of the object.
h int: The vertical size of the object.
container Rect: The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
xAdj int: Offset to apply to the X axis. If gravity is LEFT this pushes it to the right; if gravity is RIGHT it pushes it to the left; if gravity is CENTER_HORIZONTAL it pushes it to the right or left; otherwise it is ignored.
yAdj int: Offset to apply to the Y axis. If gravity is TOP this pushes it down; if gravity is BOTTOM it pushes it up; if gravity is CENTER_VERTICAL it pushes it down or up; otherwise it is ignored.
outRect Rect: Receives the computed frame of the object in its container.

apply

Added in API level 17
void apply (int gravity, 
                int w, 
                int h, 
                Rect container, 
                Rect outRect, 
                int layoutDirection)

Apply a gravity constant to an object and take care if layout direction is RTL or not.

Parameters
gravity int: The desired placement of the object, as defined by the constants in this class.
w int: The horizontal size of the object.
h int: The vertical size of the object.
container Rect: The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
outRect Rect: Receives the computed frame of the object in its container.
layoutDirection int: The layout direction.

See also:

apply

Added in API level 17
void apply (int gravity, 
                int w, 
                int h, 
                Rect container, 
                int xAdj, 
                int yAdj, 
                Rect outRect, 
                int layoutDirection)

Apply a gravity constant to an object.

Parameters
gravity int: The desired placement of the object, as defined by the constants in this class.
w int: The horizontal size of the object.
h int: The vertical size of the object.
container Rect: The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
xAdj int: Offset to apply to the X axis. If gravity is LEFT this pushes it to the right; if gravity is RIGHT it pushes it to the left; if gravity is CENTER_HORIZONTAL it pushes it to the right or left; otherwise it is ignored.
yAdj int: Offset to apply to the Y axis. If gravity is TOP this pushes it down; if gravity is BOTTOM it pushes it up; if gravity is CENTER_VERTICAL it pushes it down or up; otherwise it is ignored.
outRect Rect: Receives the computed frame of the object in its container.
layoutDirection int: The layout direction.

See also:

apply

Added in API level 1
void apply (int gravity, 
                int w, 
                int h, 
                Rect container, 
                Rect outRect)

Apply a gravity constant to an object. This supposes that the layout direction is LTR.

Parameters
gravity int: The desired placement of the object, as defined by the constants in this class.
w int: The horizontal size of the object.
h int: The vertical size of the object.
container Rect: The frame of the containing space, in which the object will be placed. Should be large enough to contain the width and height of the object.
outRect Rect: Receives the computed frame of the object in its container.

applyDisplay

Added in API level 3
void applyDisplay (int gravity, 
                Rect display, 
                Rect inoutObj)

Apply additional gravity behavior based on the overall "display" that an object exists in. This can be used after apply(int, int, int, Rect, int, int, Rect) to place the object within a visible display. By default this moves or clips the object to be visible in the display; the gravity flags DISPLAY_CLIP_HORIZONTAL and DISPLAY_CLIP_VERTICAL can be used to change this behavior.

Parameters
gravity int: Gravity constants to modify the placement within the display.
display Rect: The rectangle of the display in which the object is being placed.
inoutObj Rect: Supplies the current object position; returns with it modified if needed to fit in the display.

applyDisplay

Added in API level 17
void applyDisplay (int gravity, 
                Rect display, 
                Rect inoutObj, 
                int layoutDirection)

Apply additional gravity behavior based on the overall "display" that an object exists in. This can be used after apply(int, int, int, Rect, int, int, Rect) to place the object within a visible display. By default this moves or clips the object to be visible in the display; the gravity flags DISPLAY_CLIP_HORIZONTAL and DISPLAY_CLIP_VERTICAL can be used to change this behavior.

Parameters
gravity int: Gravity constants to modify the placement within the display.
display Rect: The rectangle of the display in which the object is being placed.
inoutObj Rect: Supplies the current object position; returns with it modified if needed to fit in the display.
layoutDirection int: The layout direction.

See also:

getAbsoluteGravity

Added in API level 14
int getAbsoluteGravity (int gravity, 
                int layoutDirection)

Convert script specific gravity to absolute horizontal value.

if horizontal direction is LTR, then START will set LEFT and END will set RIGHT. if horizontal direction is RTL, then START will set RIGHT and END will set LEFT.

Parameters
gravity int: The gravity to convert to absolute (horizontal) values.
layoutDirection int: The layout direction.
Returns
int gravity converted to absolute (horizontal) values.

isHorizontal

Added in API level 1
boolean isHorizontal (int gravity)

Indicate whether the supplied gravity has an horizontal pull.

Parameters
gravity int: the gravity to check for horizontal pull
Returns
boolean true if the supplied gravity has an horizontal pull

isVertical

Added in API level 1
boolean isVertical (int gravity)

Indicate whether the supplied gravity has a vertical pull.

Parameters
gravity int: the gravity to check for vertical pull
Returns
boolean true if the supplied gravity has a vertical pull

Hooray!