Most visited

Recently visited

Added in API level 1

Spanned

public interface Spanned
implements CharSequence

android.text.Spanned
Known Indirect Subclasses


This is the interface for text that has markup objects attached to ranges of it. Not all text classes have mutable markup or text; see Spannable for mutable markup and Editable for mutable text.

Summary

Constants

int SPAN_COMPOSING

This flag is set on spans that are being used to apply temporary styling information on the composing text of an input method, so that they can be found and removed when the composing text is being replaced.

int SPAN_EXCLUSIVE_EXCLUSIVE

Spans of type SPAN_EXCLUSIVE_EXCLUSIVE do not expand to include text inserted at either their starting or ending point.

int SPAN_EXCLUSIVE_INCLUSIVE

Non-0-length spans of type SPAN_EXCLUSIVE_INCLUSIVE expand to include text inserted at their ending point but not at their starting point.

int SPAN_INCLUSIVE_EXCLUSIVE

Non-0-length spans of type SPAN_INCLUSIVE_EXCLUSIVE expand to include text inserted at their starting point but not at their ending point.

int SPAN_INCLUSIVE_INCLUSIVE

Spans of type SPAN_INCLUSIVE_INCLUSIVE expand to include text inserted at either their starting or ending point.

int SPAN_INTERMEDIATE

This flag will be set for intermediate span changes, meaning there is guaranteed to be another change following it.

int SPAN_MARK_MARK

0-length spans with type SPAN_MARK_MARK behave like text marks: they remain at their original offset when text is inserted at that offset.

int SPAN_MARK_POINT

SPAN_MARK_POINT is a synonym for SPAN_INCLUSIVE_INCLUSIVE.

int SPAN_PARAGRAPH

SPAN_PARAGRAPH behaves like SPAN_INCLUSIVE_EXCLUSIVE (SPAN_MARK_MARK), except that if either end of the span is at the end of the buffer, that end behaves like _POINT instead (so SPAN_INCLUSIVE_INCLUSIVE if it starts in the middle and ends at the end, or SPAN_EXCLUSIVE_INCLUSIVE if it both starts and ends at the end).

int SPAN_POINT_MARK

SPAN_POINT_MARK is a synonym for SPAN_EXCLUSIVE_EXCLUSIVE.

int SPAN_POINT_MARK_MASK

Bitmask of bits that are relevent for controlling point/mark behavior of spans.

int SPAN_POINT_POINT

0-length spans with type SPAN_POINT_POINT behave like cursors: they are pushed forward by the length of the insertion when text is inserted at their offset.

int SPAN_PRIORITY

The bits specified by the SPAN_PRIORITY bitmap determine the order of change notifications -- higher numbers go first.

int SPAN_PRIORITY_SHIFT

The bits numbered just above SPAN_PRIORITY_SHIFT determine the order of change notifications -- higher numbers go first.

int SPAN_USER

The bits specified by the SPAN_USER bitfield are available for callers to use to store scalar data associated with their span object.

int SPAN_USER_SHIFT

The bits numbered SPAN_USER_SHIFT and above are available for callers to use to store scalar data associated with their span object.

Public methods

abstract int getSpanEnd(Object tag)

Return the end of the range of text to which the specified markup object is attached, or -1 if the object is not attached.

abstract int getSpanFlags(Object tag)

Return the flags that were specified when setSpan(Object, int, int, int) was used to attach the specified markup object, or 0 if the specified object has not been attached.

abstract int getSpanStart(Object tag)

Return the beginning of the range of text to which the specified markup object is attached, or -1 if the object is not attached.

abstract <T> T[] getSpans(int start, int end, Class<T> type)

Return an array of the markup objects attached to the specified slice of this CharSequence and whose type is the specified type or a subclass of it.

abstract int nextSpanTransition(int start, int limit, Class type)

Return the first offset greater than start where a markup object of class type begins or ends, or limit if there are no starts or ends greater than start but less than limit.

Inherited methods

From interface java.lang.CharSequence

Constants

SPAN_COMPOSING

Added in API level 3
int SPAN_COMPOSING

This flag is set on spans that are being used to apply temporary styling information on the composing text of an input method, so that they can be found and removed when the composing text is being replaced.

Constant Value: 256 (0x00000100)

SPAN_EXCLUSIVE_EXCLUSIVE

Added in API level 1
int SPAN_EXCLUSIVE_EXCLUSIVE

Spans of type SPAN_EXCLUSIVE_EXCLUSIVE do not expand to include text inserted at either their starting or ending point. They can never have a length of 0 and are automatically removed from the buffer if all the text they cover is removed.

Constant Value: 33 (0x00000021)

SPAN_EXCLUSIVE_INCLUSIVE

Added in API level 1
int SPAN_EXCLUSIVE_INCLUSIVE

Non-0-length spans of type SPAN_EXCLUSIVE_INCLUSIVE expand to include text inserted at their ending point but not at their starting point. When 0-length, they behave like points.

Constant Value: 34 (0x00000022)

SPAN_INCLUSIVE_EXCLUSIVE

Added in API level 1
int SPAN_INCLUSIVE_EXCLUSIVE

Non-0-length spans of type SPAN_INCLUSIVE_EXCLUSIVE expand to include text inserted at their starting point but not at their ending point. When 0-length, they behave like marks.

Constant Value: 17 (0x00000011)

SPAN_INCLUSIVE_INCLUSIVE

Added in API level 1
int SPAN_INCLUSIVE_INCLUSIVE

Spans of type SPAN_INCLUSIVE_INCLUSIVE expand to include text inserted at either their starting or ending point.

Constant Value: 18 (0x00000012)

SPAN_INTERMEDIATE

Added in API level 3
int SPAN_INTERMEDIATE

This flag will be set for intermediate span changes, meaning there is guaranteed to be another change following it. Typically it is used for Selection which automatically uses this with the first offset it sets when updating the selection.

Constant Value: 512 (0x00000200)

SPAN_MARK_MARK

Added in API level 1
int SPAN_MARK_MARK

0-length spans with type SPAN_MARK_MARK behave like text marks: they remain at their original offset when text is inserted at that offset. Conceptually, the text is added after the mark.

Constant Value: 17 (0x00000011)

SPAN_MARK_POINT

Added in API level 1
int SPAN_MARK_POINT

SPAN_MARK_POINT is a synonym for SPAN_INCLUSIVE_INCLUSIVE.

Constant Value: 18 (0x00000012)

SPAN_PARAGRAPH

Added in API level 1
int SPAN_PARAGRAPH

SPAN_PARAGRAPH behaves like SPAN_INCLUSIVE_EXCLUSIVE (SPAN_MARK_MARK), except that if either end of the span is at the end of the buffer, that end behaves like _POINT instead (so SPAN_INCLUSIVE_INCLUSIVE if it starts in the middle and ends at the end, or SPAN_EXCLUSIVE_INCLUSIVE if it both starts and ends at the end).

Its endpoints must be the start or end of the buffer or immediately after a \n character, and if the \n that anchors it is deleted, the endpoint is pulled to the next \n that follows in the buffer (or to the end of the buffer). If a span with SPAN_PARAGRAPH flag is pasted into another text and the paragraph boundary constraint is not satisfied, the span is discarded.

Constant Value: 51 (0x00000033)

SPAN_POINT_MARK

Added in API level 1
int SPAN_POINT_MARK

SPAN_POINT_MARK is a synonym for SPAN_EXCLUSIVE_EXCLUSIVE.

Constant Value: 33 (0x00000021)

SPAN_POINT_MARK_MASK

Added in API level 3
int SPAN_POINT_MARK_MASK

Bitmask of bits that are relevent for controlling point/mark behavior of spans. MARK and POINT are conceptually located between two adjacent characters. A MARK is "attached" to the character before, while a POINT will stick to the character after. The insertion cursor is conceptually located between the MARK and the POINT. As a result, inserting a new character between a MARK and a POINT will leave the MARK unchanged, while the POINT will be shifted, now located after the inserted character and still glued to the same character after it. Depending on whether the insertion happens at the beginning or the end of a span, the span will hence be expanded to include the new character (when the span is using a MARK at its beginning or a POINT at its end) or it will be excluded. Note that before and after here refer to offsets in the String, which are independent from the visual representation of the text (left-to-right or right-to-left).

Constant Value: 51 (0x00000033)

SPAN_POINT_POINT

Added in API level 1
int SPAN_POINT_POINT

0-length spans with type SPAN_POINT_POINT behave like cursors: they are pushed forward by the length of the insertion when text is inserted at their offset. The text is conceptually inserted before the point.

Constant Value: 34 (0x00000022)

SPAN_PRIORITY

Added in API level 1
int SPAN_PRIORITY

The bits specified by the SPAN_PRIORITY bitmap determine the order of change notifications -- higher numbers go first. You probably don't need to set this; it is used so that when text changes, the text layout gets the chance to update itself before any other callbacks can inquire about the layout of the text.

Constant Value: 16711680 (0x00ff0000)

SPAN_PRIORITY_SHIFT

Added in API level 1
int SPAN_PRIORITY_SHIFT

The bits numbered just above SPAN_PRIORITY_SHIFT determine the order of change notifications -- higher numbers go first. You probably don't need to set this; it is used so that when text changes, the text layout gets the chance to update itself before any other callbacks can inquire about the layout of the text.

Constant Value: 16 (0x00000010)

SPAN_USER

Added in API level 1
int SPAN_USER

The bits specified by the SPAN_USER bitfield are available for callers to use to store scalar data associated with their span object.

Constant Value: -16777216 (0xff000000)

SPAN_USER_SHIFT

Added in API level 1
int SPAN_USER_SHIFT

The bits numbered SPAN_USER_SHIFT and above are available for callers to use to store scalar data associated with their span object.

Constant Value: 24 (0x00000018)

Public methods

getSpanEnd

Added in API level 1
int getSpanEnd (Object tag)

Return the end of the range of text to which the specified markup object is attached, or -1 if the object is not attached.

Parameters
tag Object
Returns
int

getSpanFlags

Added in API level 1
int getSpanFlags (Object tag)

Return the flags that were specified when setSpan(Object, int, int, int) was used to attach the specified markup object, or 0 if the specified object has not been attached.

Parameters
tag Object
Returns
int

getSpanStart

Added in API level 1
int getSpanStart (Object tag)

Return the beginning of the range of text to which the specified markup object is attached, or -1 if the object is not attached.

Parameters
tag Object
Returns
int

getSpans

Added in API level 1
T[] getSpans (int start, 
                int end, 
                Class<T> type)

Return an array of the markup objects attached to the specified slice of this CharSequence and whose type is the specified type or a subclass of it. Specify Object.class for the type if you want all the objects regardless of type.

Parameters
start int
end int
type Class
Returns
T[]

nextSpanTransition

Added in API level 1
int nextSpanTransition (int start, 
                int limit, 
                Class type)

Return the first offset greater than start where a markup object of class type begins or ends, or limit if there are no starts or ends greater than start but less than limit. Specify null or Object.class for the type if you want every transition regardless of type.

Parameters
start int
limit int
type Class
Returns
int

Hooray!